Above Ground Pool Installation

At Patio Pleasures we can complete the package with installation service.

The first step is to survey the pool site you have chosen. Based on the selected area, measurements will be taken. This determines the approximate amount of excavation that will be necessary. We will consult with you on removal of any objects that may cause difficulty during or after the installation process (such as rocks, trees or roots). We will also discuss the routing of electricity to the filter and/or heater.

Preparation

In order to ensure that your pool will have a secure base, the site may have to be graded. This is very common even with an area that appears to be flat. During this step, obstructions will be removed and replaced. When done, a layer of mason sand will be laid to keep the pool liner from tearing or wrinkling.

Pool Construction

The frame of the pool will be assembled and made certain that it is structurally sound. The liner will be secured so the pool can be filled. Depending on the pool location the pool can be filled with a garden hose or for an extra charge a water truck can deliver water.

Electrical

When the pool has been filled, we will connect the filter and/or heater to the pool. At this time, it will need to be connected to either a temporary or permanent power source. Extension cords are not recommended. If you chose a salt water system we will connect to the control panel. Patio Pleasures has a certified electrician on staff to assist with all electrical needs.